GIP1S

Gateway de un puerto FXS que funciona bajo los protocolos SIP, H323 y MGCP. Lleva un puerto RJ45 para conectar a la red, y un RJ11 al que conectaremos un teléfono analógico normal.

Gateway IP de un puerto RJ-11

www.domoticaviva.com/Tienda

[Manual pdf]  |  [Catálogo pdf]

Cerrar [x]

Características:

· H.323 proxy y SIP STUN funciones bajo NAT.
· Llamada directa o a través de Gatekeeper.
· Configuración vía IVR y teclado del teléfono, página web y comandos Telnet

Especificaciones
de hardware:

· Teclas de función: Config – IVR, FTP; (Internet, PSTN – IP/ PSTN se habilitaran en próximas versiones de firmware)
· LED: 3 LEDs ( Power, Ethernet, Phone)
· Power/GK registro.
· Ethernet: 1 puerto IEEE802.3 10/100 Base-T, RJ45.
· Fuente de alimentación: 100~240 VAC/5V DC output
· 1 puerto RJ11
· Dimensiones: 110mm * 77 mm * 29 mm

H323:

· Soporta H.323 Versión 4
· H.245 Tunneling
· Inicio rápido
· H235 RAS seguridad H450.4 llamada en espera, H323 V4 llamada en paso.
· DTMF señales: soporta “Out band” e “In band”
· Auto Codec negociación.
· Audio CODEC: G.711u, G.711a, G.723 5.3k/6.3k, G.729, *G.729a, *G729ab
Note: G729a, G729ab has to be configured by special tool.

SIP:

· SIP-RFC3261 (Protocolo SIP)
· SIP-RFC2327 (Protocolo de descripción de Sesión)
· SIP-RFC3264 (Offer/Answer Model in SDP)
· SIP-RFC2617 (Autenticación HTTP: Basic and Digest Authentication)
· SIP-RFC2833,2976 (In band, out band DTMF señales)
· SIP-RFC3489 (STUN)
· Supplementary Services: Future Release

MGCP:

· Soporta MGCP RFC2705

TCP/IP:

· TCP/UDP/RTP/IP
· DHCP client
· PPPoE
· Servidor Telnet
· Configuración remota FTP y firmware actualizable
· SNTP